Bilge-B-Dry Filter Material for Pickup
Model: FM-2024
Are you looking to replace your low-profile bilge water pickup?No need to discard or throw away the pickup enclosure!Replacing the internal filter material is easy and helps reduce plastic waste.
1. Separate bottom plate from enclosure2. Remove and discard old material3. Install sponge in the center4. Place the oil absorbent material over the sponge5. Snap the bottom plate back into place
The filter material must be re-installed in the order it was removed with all material to prevent pump clogging and damage.
What’s in the Box:
- Four (4) sponges and Four (4) oil absorbent pads.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
